Page.
29/55
5.2.3.
Power supply of the stove
•
The unit should be connected to the main power supply with the provided
connection cable, according to the safety rules and appropriate norms;
•
The hopper should be filled with pellets, in order transport material by the
pellet feeding auger to the burner. It’s recommended to set the pellet
hoper lid closed;
EXPLANATION: For safety reasons is recommended the refueling to
be done when the stove is stopped and cool. In cases of refueling is
needed to be done during work of the stove, you need to be careful the
pellet bag not to touch the hot surfaces;
ATTENTION: The producer is not responsible for damages or improper
work of the stove if fuel which does not meet the producer’s requirements
is used. The producer is not responsible and does not cover the warranty
in cases of use of fuel which does not meet the requirements – For
instance bad quality pellets can damage the fuel feeding mechanism;
•
The unit is connected to the main power supply with the provided
connection cable, the coupling is connected to the stove’s electric inlet
and the power plug is connecter to grounded power outlet.
ATTENTION: In cases that the stove is too hot the power supply cable
can get melted/damaged in contact with the hot surface
The use of melted/damaged cable is PROHIBITED;
5.2.4.
Turning on the appliance.
•
Turning on the stove in working regime is done by holding button (4) for
a period of two seconds. In this regime the heating element is on (at the
same time the smoke fan is working and for some periods of time the
screw is feeding pellets into the burner). The heating element heats up the
pellets in the burner until they ignite. This process takes up to 15 min.
depending of the characteristics of the fuel and the ambient temperature.
•
By buttons (1) and (2) is set the desired temperature of the air in the room.
•
The desired power level of the stove is set by buttons (5) and (6);
