Page.
24/55
o
Lower heat power of the stove;
o
Dirty gals of the door of the burning chamber;
o
Unburned fuel in the ash container;
o
Clogging the fuel feeding screw and stopping of the stove ;
5.2.
Starting hot air pellet stove “ERATO Pony PS9” procedure.
Basic requirements:
•
Any maintenance procedures should be performed in accordance with the
described in this manual;
•
Before entering the stove in service you must check if all moving parts and
details are on place and functioning.
•
The appliance needs to be periodically checked during work.
•
Any intervention in the working process of the unit, which could lead to
unit’s failure and/or dangerous and health threatening situations, are strongly
prohibited;
•
The unit should be checked by the maintenance staff or any trained personal
regularly;
•
The end-user should not perform any interventions, repairs, etc. of the unit.
In case that warning and failures arise, check the failures table (applied at
the end of this manual) and call the service support if the case is not
described there;
•
The use of any igniting liquids or materials is prohibited.
•
The door of the burning chamber needs to be completely closed during
work.
•
Any adjustments of thermal capacity higher than the nominal thermal load of
the units are not allowed;
•
The ash, deposited in the combustion chamber of the boiler, should be
collected in fireproof containers and cooled down to ambient temperature.
The cooled ash should be disposed in appropriate waste containers. Please
take into account that the mineral ash, result of wood biomass pellets could
be considered as soil fertilizer and dispersed for agricultural purposes for
example;
ATTENTION The temperature of the door’s glass can reach 280-300
o
C (see
figure 4.1)
