Equipment Zone Fast T-Jet 3, Руководство пользователя

Страница: 26 / 145

Fast T-Jet 3 User’s Manual
12
Encoder Strip is a thin piece of clear plastic with data that is read by the Print
Head as the unit operates. The Encoder Strip tells the Print Head exactly where
to print an image. If the Encoder Strip becomes dirty or damaged, the printer will
get confused, resulting in the printing of multiple images, strips of solid ink and
other irregular printing patterns.
Plug Unit into AC Power
Plug the Fast T-Jet 3 into its own power source.
DO NOT TURN THE PRINTER ON YET! YOU MUST FIRST INSTALL THE BULK INK SYSTEM.
Insert the AC cord in unit and plug into a power strip with surge protection.
Avoid plugging multiple items into the power strip. The Fast T-Jet 3 has a dual
voltage power converter and will work on 50 or 60 cycle current that ranges
from 110 volts to 220 volt.
To prevent power surges from damaging your unit and/or
ruining shirts during a production run, plug the unit into a UPS
(Uninterruptible Power Supply).
DO NOT plug other high power use items into the same circuit, such
as a Heat Press - The Press will cycle on and off causing power
fluctuations and, potentially ruining shirts.
NEVER shut off your Fast T-Jet 3 at the power strip;
use the Power button then Main Power Switch on
the actual unit (located by the AC cord). During
Power Off of any inkjet printer, the printer goes
through a shut down cycle that seats the head so
you won’t get head clogs. If you shut the unit off at
a power strip it does not go through a normal shut
down.
Connecting Your Fast T-Jet 3 to a Computer
You can connect the Fast T-Jet 3 to a computer
with a normal parallel cable, USB cable or an IEEE
1394 FireWire cable. Use the included gold tip USB
cable for best results. In any situation take care