Equipment Zone Fast T-Jet 3, Руководство пользователя

Страница: 65 / 145

For more information on designing and printing vector or bitmap
images, Spot Colors and gradients, consult your FastARTIST User’s
Manual and the Help sections of your graphics application.
Quick Printing Tips
You should perform a Head Cleaning if you experience one of the following •
conditions:
If streaks appear in the print ▪
If small drops of ink appear on ▪
the garment outside of the
printed image
If the unit has been sitting for a ▪
few days
If the Print Head strikes a ▪
garrment.
Press the Ink button for three seconds to initiate a Head Cleaning cycle. You
may do this in the middle of a print job if necessary. If you experience severe
head clogs you can do a number of Head Cleanings back-to-back using the
Epson utility.
If you have been printing a lot of shirts, you may have to manually wipe •
the bottom of the head to remove cotton lint.
The best way to check print quality is to do a Nozzle Check from the Epson •
Adjustment Utilities Program. Refer to Chapter 7 for more information.
Spots or ink stains must be removed BEFORE the print is cured by using a •
standard Spot Removal gun. Make sure to NOT spray the wet print. Once the
ink is cured it is almost impossible to remove spots or smudges.
Prints can be laundered as normal. If possible, give the customer washing •
instructions of: Turn print inside out before washing or drying. Use Cold Water
Only and a Medium Dryer Temperature .
You can expect a little fading with the first washing. This is normal and very •
similar to what you would get from a screen printed shirt. If you experience
a lot of fading, make sure to check your dryer temperature. If the shirts are
damp from excess humidity, you should put them under the heat press for a
few seconds to dry out before printing.
51
Chapter 4- Printing with the Fast T-Jet 3