Equipment Zone Fast T-Jet 3 Скачать руководство пользователя страница 144

Страница: 144 / 145

Fast T-Jet 3 User’s Manual

132

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy, and if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to

•

which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

WARNING: The connection of a non-shielded equipment interface cable to this

equipment will invalidate the FCC Certification of this device and may cause

interference levels, which exceed the limits established by the FCC for this equipment.

It is the responsibility of the user to obtain and use a shielded equipment interface

cable with this device. If this equipment has more than one interface connector, do not

leave cables connected to unused interfaces. Changes or modifications not expressly

approved by the manufacturer could void the authority to operate the equipment.

For Canadian Users

This Class B digital apparatus complies with Canadian ICES-003.

Declaration of Conformity

According to 47CFR, Part 15 for Class B Personal Computers and Peripherals; and or

CPU Boards and Power Supplies used with Class B Personal Computers:

We: U.S. Screen Print & Inkjet Technology a division of U.S. Graphic Arts, Inc.

Located at: 1901 East 5th Street Tempe, AZ 85043 Telephone: (480) 929-2937

Declare under sole responsibility that the product identified herein, complies with 47CFR

Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed

is identical to the representative Unit tested and found to be compliant with the

standards. Records maintained continue to reflect the equipment being produced

can be expected to be within the variation accepted, due to quantity production

and testing on a statistical basis as required by 47CFR 2.909. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

Содержание Fast T-Jet 3


















































































































































Результаты поиска

Содержание Fast T-Jet 3

Отзывы:

Похожие инструкции для Fast T-Jet 3

Бренды по названию

Популярные бренды

Equipment Zone Fast T-Jet 3, Руководство пользователя

Результаты поиска

Содержание Fast T-Jet 3

Отзывы:

Похожие инструкции для Fast T-Jet 3

Бренды по названию

Популярные бренды