Menu
Settings and Explanations
USB I/F Timeout Setting
Specify the length of time in seconds that must elapse before ending USB communication with a
computer after the printer receives a print job from a PostScript printer driver or PCL printer
driver. If the job ending is not clearly defined from a PostScript printer driver or PCL printer
driver, it can cause endless USB communication. When this occurs, the printer ends
communication after the specified time has elapsed. Enter 0 (zero) if you do not want to end
communication.
Printing Language
Select the printing language for the USB interface or the network interface.
Auto Error Solver
Select an action to perform when a 2-sided printing error or a memory full error occurs.
❏
2-sided printing error
Enabled: If a 2-sided job is sent when there is no paper available that supports 2-sided
printing, the printer displays an error message, and then automatically prints on only one
side of the paper.
Disabled: The printer displays an error message and cancels printing.
❏
Memory full error
Enabled: If the printer's memory becomes full while printing, the printer displays an error
message, and then prints only the part of the data that the printer could process.
Disabled: The printer displays an error message and cancels printing.
Memory Device
Interface
Memory Device
Enables a memory device inserted in the printer. If this feature is
disabled, the printer does not recognize the inserted memory
device.
File Sharing
Select whether to give write access to the memory device from a
USB-connected computer or from a network-connected computer.
PC Connection via USB
Enables the printer which is connected to the computer over a USB connection. If this feature is
disabled, the computer does not recognize printers with a USB connection.
Fax Settings
Select
Setup
>
System Administration
>
Fax Settings
from the home screen.
Menu
Settings and Explanations
User Default
Settings
The settings made in this menu become your default settings for sending faxes. For details on the
setting items, see the list of menus in Fax mode.
Send Settings
Batch Send
See the pages that describe these features for more details.
Save Failure Data
Saves documents that failed to be sent in the printer's memory. You can resend
the documents from the
Status Menu
.
Receive Settings
Receive Mode
Select the receive mode.
DRD
If you have subscribed to a distinctive ring service from your telephone company,
select the ring pattern to be used for incoming faxes (or select
On
).
Rings to Answer
Select the number of rings that must occur before the printer automatically
receives a fax. Select "0" (zero) if you want to receive faxes with no ringing.
Remote Receive
When you answer an incoming fax call on a phone connected to the printer, you
can start receiving the fax by entering the code using the phone.
User's Guide
Printer Basics
33
