Code
Problem
Solution
208
The fax could not be sent to some of the specified
recipients.
Print a
Fax Log
or
Last Transmission
report for
previous faxes from
Fax Report
in the Fax mode to
check the failed destination. When the
Save Failure
Data
setting is enabled, you can resend a fax from
Job Monitor
in
Status Menu
.
301
There is not enough storage space available to save
the data in the memory device.
❏
Increase the storage space in the memory device.
❏
Reduce the number of documents.
❏
Lower the scanning resolution or increase the
compression ratio to reduce the size of the
scanned image.
302
The memory device is write-protected.
Disable write protection on the memory device.
303
No folder has been created to save the scanned
image.
Insert another memory device.
304
The memory device has been removed.
Reinsert the memory device.
305
An error occurred while saving the data to the
memory device.
If the external device is accessed from a computer,
wait for a while and then try again.
306
The memory is full.
Wait until other ongoing jobs are finished.
311
A DNS error has occurred.
❏
Select
Setup
>
System Administration
>
Wi-Fi/
Network Settings
>
Advanced Setup
>
DNS
Server
, and then check the DNS settings.
❏
Check the DNS settings for the server, the
computer, or the access point.
312
An authentication error has occurred.
Select
Setup
>
System Administration
>
Wi-Fi/
Network Settings
>
Advanced Setup
>
Server
>
Server Settings
, and then check the server
settings.
313
A communication error has occurred.
❏
Select
Setup
>
System Administration
>
Wi-Fi/
Network Settings
>
Advanced Setup
>
Server
>
Server Settings
to check the email
server settings. You can check the cause of the
error by running connection check.
❏
The authentication method of the settings and
the email server may not match. When you select
Off
as the authentication method, make sure the
authentication method of the email server is set
to None.
❏
Check the network connection. See the
Network
Guide
for more details.
314
The data size exceeds the maximum size for attached
files.
❏
Increase the
Attached File Max Size
setting in
the scan settings.
❏
Lower the scanning resolution or increase the
compression ratio to reduce the size of the
scanned image.
315
The memory is full.
Retry after other ongoing jobs are finished.
User's Guide
Solving Problems
151