Epson TM-T88VII, Техническое справочное руководство

Страница: 79 / 142

79
Chapter 3 Advanced Usage
Printing a Status Sheet
Follow the steps below to check the interface settings.
Using the Status Sheet Button
1
If there is a connector cover, remove the cover.
See "Attaching the Connector Cover" on page 44 for details on removing the connector cover.
2
Check that the printer is turned on.
Make sure the roll paper cover is closed.
3
Hold down the status sheet button for at least three seconds.
The status sheet is printed.
To let the printer back to normal mode, hold down the Feed button for at least one second.
Using the Feed button
1
Check that the printer is on.
2
Open the roll paper cover.
3
Hold down the Feed button for at least one second.
4
Close the roll paper cover.
The status sheet is printed.
To let the printer back to normal mode, hold down the Feed button for at least one second.
When the power LED is flashing, wait until it remains lit to start printing.
•
After the status sheet is printed, only the print settings of the mainly connected interface are
retained. For the mainly connected interface, see
"Printing Using Multiple Interfaces" on page
28 .
•
Ethernet and Wi-Fi status sheets are not printed while the printing communication protocol is
being established. They will be printed after the connection is cut off (including being cut due to
a time out).
•
"(none)" is printed for the "Connected Peripheral" if no peripherals are connected to the USB
downstream port connector.