Epson TM-T88VII, Техническое справочное руководство

Страница: 115 / 142

115
Appendix
Environmental Conditions
∗
The value measurements are equivalent to JISC0920 (IEC60529:2001) standard. Therefore, safety standard
application, and failure and breakage of the printer are not guaranteed.
Temperature/
Humidity Operating 5 to 45°C {41 to 113°F}, 10 to 90% RH (See the operating temperature and
humidity range below.)
Storage
(Factory packing)
-10 to 50°C {14 to 122°F}, 10 to 90% RH (except for paper)
Vibration
resistance When packed Frequency: 5 to 55 Hz
Acceleration: Approximately 19.6 m/s
2
{2G}
Sweep: 10 minutes (half cycle)
Time: 1 hour
Orientation: x, y, and z
There is no external or internal visible damage and the unit operates
normally after being subjected to vibration.
Shock resistance When packed Packing: Epson standard package specifications
Height: 60 cm {23.62"}
Orientation: 1 corner, 3 edges, and 6 surfaces
There is no external or internal visible damage and the unit operates
normally after being dropped.
When unpacked Height: 5 cm {1.97"}
Orientation: Lift one edge and release it (for all 4 edges)
There is no external or internal visible damage and the unit operates
normally after being dropped while not operating.
Acoustic noise (operating) Approximately 52 dB (bystander position)
Note: The values above are measured in the Epson evaluation condition.
Acoustic noise differs depending on the paper used, printing
contents, and the setting values, such as print speed or print
density.
Dust and drip proofness function
*
IPX2 equivalent
Note: Roll paper side is excluded.
When the rubber feet sections are installed horizontally.
Altitude Up to 3,000 m
Relativ
e humidit
y
Operating environment
range
90
65
10
5 34 40 45
Ambient temperature
[%RH]
34°C, 90%
40°C, 65%
45°C, 50%
[°C]
31°C, 90%
34°C, 75%
45°C, 43%
Specified original paper other
than below
Specified original paper:
P5047(46)