Epson TM-T88VII, Техническое справочное руководство

Страница: 35 / 142

35
Chapter 2 Setup
Wireless LAN Interface (With OT-WL06)
You can connect using a wired cable (LAN/USB), or connect using SimpleAP mode, and setup a wireless LAN
using a network configuration tool. When setting up multiple printers, you can connect using a wired cable
(LAN/USB) and setup a wireless LAN using the Epson Deployment Tool.
Using Epson TM Utility for iOS/Android, you can easily connect the printer to the network from an iOS or
Android devices.
•
When using wireless LAN, make sure you disconnect the LAN cable. If a LAN cable is connected,
wireless LAN is disabled.
•
When you set up the access point at the same time, set the access point in advance and check that
it operates correctly.
•
Examine the radio wave situation in the surrounding area before use.
•
Avoid using the same channel that is used in the neighboring shops where Wireless LAN is used.
•
Wireless LANs with a frequency band of 2.4 GHz interfere with
Bluetooth
communication. When
using
Bluetooth
and Wi-Fi at the same time, we recommend using 5 GHz.
•
When using the printer in environments where kitchen microwaves and other devices that may
interfere radio waves are installed, observe the following points.
∗
Keep the printer away from the devices, such as kitchen microwaves, that may cause radio wave
interference.
∗
Use channels that are away from the frequency bands that may cause radio wave interference.
∗
Place shields between the printer and the devices that may cause radio wave interference.
∗
Select either 2.4 GHz or 5 GHz, whichever is free from radio wave interference.
∗
In auto channel setting for the access point, do not select a channel in which the devices may
cause radio wave interference.
For SimpleAP mode, see "Simple Setup for Wireless LAN" on page 26 .