Epson TM-C7500 Series, Техническое справочное руководство

Страница: 202 / 224

202
When "Borderless Printing" is enabled
Ver ti cal mar gin s: 0 mm (Typ i cal val u e)
La t eral mar gin s: 0 mm (Typ i cal val u e)

If you enabled “Extend Printable Area”, printing is done with settings for no margins, but the
printing might protrude beyond the paper/ label, depending on the actual print position and
the set position for the paper/ label. To make sure printing doesn’t protrude out, ensure
margins of 1.5 mm {0.06"} or more in the print data.

The distance from the paper cut position to the black mark leading edge must be at least 1.5
mm {0.06"}. If it is less than 1.5 mm {0.06"}, the printer may be unable to print pages
because it fails to sense their black marks or skips them, etc.
Black mark position
Paper
Label area
Print area
Print area width
Paper width
Paper feeding
direction
Auto-cut position
Auto-cut position
Auto-cut position
Perforated line
1.5 mm { }
0.06”
Outer edge
(Removed)
2.0 mm { }
0.08”
Outer edge
(Removed)
2.0 mm { }
0.08”
1.5 mm { }
0.06”
25.4 mm { } or more
1.0”
28.4 mm { } or more
1.12”
1.5 mm { }
0.06”
0.5 to 1 mm { }
0.02 to 0.04”