Epson Stylus Pro 7500, Руководство по обслуживанию

Страница: 78 / 274

EPSON Stylus Pro 7500 Revision A
Troubleshooting Troubleshooting Based on Error Display 78
3.2 Troubleshooting Based on Error Display
This printer executes self-diagnosis based on the status detected by each sensor, detects
abnormal states by the results of the self-diagnosis and displays the error status by means of
error messages.
If any error display occurs, check the relevant error items from the panel display list shown
below and take the appropriate action. (refer to the check points and the treatment content
and take measures to correct the trouble.)
For methods of treating errors that require a service man which are not covered in the
“User’s Manual” which was supplied with the printer, see the item “Errors That Require a
Service Technician” in 3.3. *1
*1: Errors that Require a Service Man
The necessary error occurrence states for treatment accompanying checks
or replacement of the relevant parts by a service man are shown.
Table 3-1. LCD Panel Error Messages
LCD message Status Type
Refer to
page
INK OUT Ink End, Wrong Ink Cartridge Error
INK DRY nn MIN Ink drying Status
INK LOW Ink low Warning
80
INK CHARGING
nnn
Initial Ink Charge Status
LOAD INK
CARTRIDGE
Performing ink cartridge replacement Status
83
PRESS PAUSE
BUTTON
Waiting for the paper-initialization trigger Status
READY Printer is ready Status
ANABLE TO
PRINT
Cannot perform test print. Error
85
PRINTING Printing the current print job. Status
OPTION I/F ERROR Type-B interface error Error
84
NO INK
CARTRIDGE
One or more ink cartridges not installed Error 84
COVER OPEN The cover is open Error 82
TURN PWR OFF
AND ON
The printer needs to re-initialize. Status
SERVICE REQ.
nnnnnnnn
Fatal error occurred Error 85
WAIT
Initializing printer, initializing paper, charging
ink, resting timer IC, or clearing NVRAM
Status
POWER OFF Performing power-off sequence Status
PAUSE Printer paused Status
MAINTENANCE
REQ. nnnn Maintenance required (waste ink pad
replacement)
Warning
80
TRANSPORT PREP
nn%
Draining transport fluid (100% = end) Status
PAPER NOT CUT Paper cut error Error
82
PAPER NOT
STRAIGHT
Paper fed at a slant Error
82
PAPER JAM Paper jam occurred Error 82
PAPER OUT No paper loaded or roll paper end Error
81
SECURE PAPER
LEVER
The Paper Set Lever was moved to the Released
position during printing and must be returned to
the Set position.
Error
83
LOAD PAPER
Paper is loaded but the Lever is not in the Set
position. Move to the Set position.
Error
RELOAD PAPER
Paper recognition error or paper feed/exit error
(cut sheets only)
Error
83
Table 3-1. LCD Panel Error Messages
LCD message Status Type
Refer to
page