Epson Stylus Pro 7500, Руководство по обслуживанию

Страница: 45 / 274

EPSON Stylus Pro 7500 Revision A
Product Description Panel Setting Menu 45
The user papersetting menu item list is shown below.
*1: If “STD” is selected in the paper selection, the paper thickness sensing pattern printing and
paper thickness No. selection items are not displayed. These are displayed only if papers “1”
to “4” are selected. Paper setting and operations at that time are as shown in the table below.
*2:The paper thickness No. selection default display is the number corresponding to the paper
thickness when the gap adjustment was carried out.
*3:During printing of the pattern, the message “PAT. PRINTING.” is displayed.
*4:By setting the suction force setting on “LOW” the suction force during printing is reduced by
(TBD%) when printing is carried out. In the case of extremely thin film, etc., the film will get
stuck on the platen and it may not be possible to print under the normal suction force.
Table 1-34. User Paper Setting Menu Setting Item List
Display Set Value Contents
PAPER NUMBER
STD
1~4 *1
Epson genuine paper is used at the “Standard”
setting. If you are using paper with the user set
paper thickness, “1 ~ 4,” specify the relevant
No.
THICK. PAT. PRINT *3
Prints patterns for confirming the sensing of the
set paper thickness. (This item is not displayed
if “Standard” is selected for the “Paper No.”)
PAPER THICK. NO. 1~17*2
This displays a number which is the default
value for paper thickness set in the “Paper
Thickness” item in the Gap Adjustment menu.
(0.0 mm = 1/1.6 mm = 17) (This item is not
displayed if “Standard” is selected for “Paper
No.”)
DRYING TIME 0 MIN. ~ 30 MIN.
Sets the ink drying time. When auto cutting roll
paper, the printer waits the set period of time
after finishing printing.
SUCTION
NORM
LOW *4
Selects the suction force at the paper platen.
Table 1-35. Paper Setting and Operation
Paper Setting Operation
STD
The paper thickness is in accordance with the paper
thickness setting command (PH Command).
If the paper thickness setting command is not sent, the
printer’s default value is used.
The ink drying time is the ink drying time set by the
user except in cases where a command is not sent.
Also, the suction force set by the user is always used
for suction.
1 These are user registered papers.
In the case of these settings, the paper thickness setting
command is disregarded and the paper thickness is set
by the user.
As for the ink drying time, the ink drying time set by
the user is used except in cases where the command is
not sent.
Also, the suction force set by the user is always used
for suction.
2
3
4