Epson Stylus Photo RX700 Series, Основное руководство

Страница: 23 / 98

Making Prints From Slides or Negatives
23
5. On the next screen, use the
u
,
d
,
l
,
r
arrow buttons to select basic print
settings. Press
OK
when done making your settings.
■
Paper Type
: Select the setting for the type of paper you’ve loaded
(see page 31).
■
Paper Size
: Select the size of paper you’ve loaded.
■
Layout
: If you want to print without white borders around the edges,
choose
Borderless
. Otherwise choose
with Border
.
■
Restoration
: Turn on to restore color to faded slides or negatives
(see page 25).
Note:
Borderless printing is available only for Epson photo papers in these sizes:
4 × 6-inch, 5 × 7-inch, 8 × 10-inch, and letter-size.
Whether you print with or without borders, your photos will be slightly cropped
because 35-mm film has different proportions than those of the paper you’re
printing on.
6. If you would like change the print quality or color saturation, press the
Options
button. Change any settings as needed, then press
OK
.
7. Select the film type you’ve loaded. If you’re scanning slides, select
Color slide
.
If you’re scanning a film strip, select one of these options:
■
Color negative film
(used in most cases)
■
B&W negative
■
Positive color film (strip)
Press
OK
after making your selection.
The RX700 scans your photos and displays the first one on its screen:
8. Use the
l
and
r
arrow buttons to preview each of your photos.
9. While a photo is displayed, use the
+
and
–
buttons to select how many copies
of it you’d like.