Epson Stylus Photo RX700 Series, Основное руководство

Страница: 73 / 98

Checking and Cleaning and Print Head
73
5. Examine the nozzle check pattern you printed. Each staggered line should be
solid, with no gaps, as shown.
■
If your printout looks okay, you’re done. Press
Back
to return to the Setup
menu.
■
If you see any gaps, as shown below, press
OK
and follow the instructions
on the screen to clean the print head.
Cleaning the Print Head
Follow these steps to clean the print head so it can deliver ink properly. Print head
cleaning uses ink, so clean it only if quality declines.
Note:
You can also clean the print head using the printer software. Click the ? or Help button
on your printer settings screen for instructions on running the print head cleaning utility.
1. Make sure the Stylus Photo RX700 is turned on but not printing.
2. Press the
Setup
button.
3. Use the
u
and
d
buttons to select
Head Cleaning
.
4. Press the
OK
button, then press
OK
again to start cleaning.
Cleaning takes about a minute, and you see a message on the RX700 screen
indicating that cleaning is in progress.
5. When cleaning finishes, press
OK
to print a nozzle check pattern to check the
results (see page 72).
If you don’t see any improvement after cleaning three or four times, check the
solutions beginning on page 78. You can also turn the Stylus Photo RX700 off
and wait overnight—this allows any dried ink to soften—and then try cleaning
the print head again.