Epson Stylus Photo RX700 Series, Основное руководство

Страница: 20 / 98

20
Copying
Placing 35-mm Slides in the Holder
1. Fit the holder’s tabs into the two small holes at the rear edge of the glass.
Make sure the cutouts for 35-mm slides are in the middle of the glass (not at
the rear edge) to align them with the fluorescent lamp when you close the lid.
2. Place your slides in the film holder as shown.
Note:
The photos should be mirror-imaged when viewed from overhead. (The shinier
side of the film faces down; the duller side faces up.)
To avoid cropping of your photos, always place your slides with the wider part of
the film width-wise on the glass (in landscape orientation).
Continue with the steps on page 22 to scan and print your photos.
Cutouts for slides
are in middle of glass
Fluorescent lamp