Epson LX-80, Руководство по эксплуатации

Страница: 183 / 193

DIP sw itche s 42 , 0-1-4
D a t a dump mode F-6-8
D a t a dumping in hexadecimal F-6-8
D a t a tr a n s f e r s equence 1-3 .
D efa ult se t t ings on reset 40
D ef i n in g c haracters See User-defined characters
D e m o n s tr a ti o n programs 37-41
D e n s it y S ee Graphics mode
D o t g r a phic s See graphics
Dot matrix 25-29
D o ubl e-s trik e mode 45 , C-6-7, <ESC> G turns it on ;
<E S C> H turns it off
D rive r S ee printer driver
Dum p in g d a t a in hexadecimal mode F-6-8
E SCa p e co d e listed by function Appendix C
ESCape co d e listed numerically Appendix B
< E SC> ! Master select 49-51 , C-10
< E SC> -0 Turns underline mode off 48-49 , C-8
<ESC> -1 Turns underline mode on 48-49 , C-8
< E SC> % Selects a character set 63-73 , C-25
<E S C>
&
Defines characters 63-73 , C-25
<ESC>
*
Graphics mode command C-28
<ESC> 0 Set s line spacing to 1 / 8 inch 60-61 , C-15
<ESC> 1 Sets line spacing to 7 / 72 inch 60-61, C-15
<ESC> 2 Sets line spacing to 1 / 6 inch 60-61 , C-16
<ESC> 3 Sets line spacing in 216ths 60-61, C-16
<ESC> 4 Turns italic mode on 47-48, C-10
<E ~ C> 5 Turns italic mode off 47-48 , C-10
< E SC> 8 Turns paper-out sensor off 58, C-18 , F-3
<ESC> 9 Turn s paper out sensor on 58, C-18, F-3
<ESC> : Copies ROM characters to RAM area 63-73, C- 25
< ES C> < Turns one-line unidirectional mode on C-14
<ESC>
?
Reassigns an alternative graphics code C-28
<ESC> @ Reset code 40 , C-ll
<ESC> A Sets line spacing in nnds of an inch C-17
<ES C > B Sets vertical tabs C-21
< E SC> C Sets the form length 57-58 , C-19 , 0-2-3
< E SC> 0 Sets horizontal tabs C-23
< E SC> E Turns emphasized mode on 43-45, C-6
< E SC> F Turns emphasized mode off 43-45, C-6
<ESC> G Turns double-strike mode on 45 , C-6
< E SC> H Turns double-strike mode off 45, C-7
< E SC> J Produces an immediate line feed C-16
< E SC> K Turns single density graphics mode on C-26
< E SC> L Turns low-speed double-density graphics mode on C-26