Epson LQ-1050, Руководство пользователя

Страница: 139 / 356

Notice that the dots overlap quite a bit. This design was printed
using the triple-density, 24-pin graphics option because the density
is the same (180 dots per inch) in both directions.
Adding the following lines to the preceding program causes the
pattern to print 10 times in a row as shown below:
1 5
6 5
Individual graphics option commands
There are four individual graphics option commands that are very
much the same as the ESC * command, but each one works for only
one graphics option. All these commands are for 8-pin graphics
options. Note that the commands contain one less variable than the
ESC * command because they don’t need to select a graphics option.
The commands are shown below:
Because of a difference in line spacing increments, the shape of
graphics figures produced on the printer with an 8-pin option is
different from the output from the same program on a 9-pin printer.
4-20
Software and Graphics