118
Adjusting the Projector's Brightness Level
When projecting with multiple projectors, you must adjust the brightness setting so that all projectors are
equally bright. (Even after adjusting the brightness levels, the brightness of each projector may not
match exactly.)
1.
Turn on all the projectors and display the same image.
2.
Press the
Menu
button.
3.
Select the
ECO
menu and press
Enter
.
4.
Select
Brightness Settings
and press
Enter
.
5.
Select the
Light Source Mode
setting and choose one of the following:
•
Normal
: Sets the brightness to the maximum level (estimated life span of the light source is
approximately 20,000 hours)
•
Quiet
: Sets the brightness to 70% and reduces fan noise (estimated life span of the light source is
approximately 20,000 hours)
•
Extended
: Sets the brightness to 70% and extends the life expectancy of the light source
(estimated life span of the light source is approximately 30,000 hours)
•
Custom
: Select a custom brightness level between 70% and 100%
6.
If you select
Custom
, select the
Brightness Level
setting from the Brightness Settings screen and
use the left and right arrow buttons on the remote control to adjust the brightness level.
7.
Press
Esc
to return to the previous screen.
Содержание Home Cinema LS-100
