Light
Status
Solutions
Initial ink charging may not be complete.
See the
Start Here
poster to complete initial ink
charging.
When ink is low, initial ink charging may not be
completed.
It is time to reset the ink level.
Refill the ink tank to the upper line, and then reset the
ink level.
There is not enough ink remaining to
perform cleaning.
Refill the ink tank to the upper line, and then reset the
ink level before cleaning.
It is nearly time to reset the ink level.
You can print until it is time to reset the ink level.
Prepare a new ink bottle.
The maintenance box is nearing the end of
its service life.
When a message saying that you can continue
printing is displayed on the computer, press the
button to continue printing. The lights stop flashing
for the time being, however, they will continue to
flash at regular intervals until the maintenance box is
replaced.
No paper is loaded or more than one sheet
has been fed at a time.
Load paper and press the
button.
The paper size loaded does not match the
print setting.
Load the correct size paper.
There is a problem with the printer driver.
Press the
button to cancel the print job.
Flashing slowly (at 1.25 second intervals)
A paper jam has occurred.
Remove the paper and press the
button.
Flashing fast (at 0.5 second intervals)
Paper remains inside the printer.
Load A4 size paper in the rear paper feed slot, and
then press the
button to remove the paper inside.
Load paper in the portrait direction.
❏
The printer was not turned off correctly.*
❏
Because the printer was turned off while
operating, the nozzles may have dried
and clogged.
* The power was turned off with a power
strip or breaker, the plug was pulled out of
the outlet, or an electrical failure occurred.
❏
After clearing the error by pressing the
button,
we recommend performing a nozzle check. Cancel
any pending print jobs.
❏
To turn off the printer, make sure you press the
P
button.
Flashing simultaneously
The printer cover is open.
Close the printer cover until it clicks.
Flashing simultaneously
The output switch lever is lowered.
Raise the output switch lever.
Flashing simultaneously
The output switch lever is raised.
Open the paper cassette cover, and then lower the
output switch lever.
User's Guide
Solving Problems
97
Содержание ET-M1170 Series
Страница 1: ...User s Guide NPD6078 00 EN ...