Wireless Network Projection
127
method, connect the projector using
Quick Connection Mode
of the Epson
iProjection software or use Screen Mirroring.
• Infrastructure mode lets you connect to smartphones, tablets, or computers
over a wireless network access point. When you use this method, connect
the projector using
Advanced Connection Mode
of the Epson iProjection
software.
a
When monitoring or controlling the projector using wireless LAN in
standby mode, connect your computer and projector with
infrastructure mode.
Your projector has built-in wireless LAN modules. If you install an additional
optional wireless LAN module, you can use both network connection
methods at the same time. When you install the wireless LAN module, set the
Simple AP
setting to
On
.
s
Network
>
Network Settings
>
Simple AP
Installing the Wireless LAN Module
To use the additional wireless connections, install the Epson wireless LAN
module. Do not install any other type of wireless LAN module.
Attention
Never remove the module while its indicator is blue or flashing, or while you are
projecting wirelessly. This could damage the module or lose data.
a
Use a cross-head screwdriver to remove the screw that secures the
wireless LAN module cover.
