❏
Pre-punched paper
Note:
❏
Load a single sheet of defined size plain paper with binding holes at the left or right.
❏
Adjust the print position of your file to avoid printing over the holes.
4.
Slide the edge guides to the edges of the paper, and then close the feeder guard.
c
Important:
Do not place objects on the feeder guard. Doing so may prevent paper from feeding.
5.
On the control panel, set the size and type of the paper you loaded in the rear paper feed.
To select an item, use the
u
d
l
r
buttons, and then press the OK button.
Note:
You can also display the paper size and paper type settings screen by selecting
Settings
>
Printer Setup
>
Paper Source
Settings
>
Paper Setting
.
6.
Slide out the output tray.
Note:
Return the remaining paper to its package. If you leave it in the printer, the paper may curl or the print quality may
decline.
User's Guide
Preparing the Printer
45
Содержание C11CH42401
Страница 1: ...User s Guide NPD6062 00 EN ...
Страница 88: ...3 Click Make Job Settings User s Guide Scanning 88 ...