Epson AcuLaser M4000N, Руководство по обслуживанию

Страница: 429 / 477

EPSON EPL-N3000/AcuLaser M4000N Revision C
Appendix Control Panel Special Operations 429
Confidential
7.3.2 Special Menu
The following special adjustment menu is provided.
The underlined values are default values.
SUPPORT MENU
PRINTER ADJUST MENU
MAINTENANCE MENU
Setting item Settings Explanation
EPL-
N3000
AcuLaser
M4000N
HDD Format Executable
type
Formatting the hard disk drive
O O
PS3 HDD Init Executable
type
Erase only the fonts installed from the
Adobe PostScript 3 (PS3).
O O
HDD Data All
Delete Executable
type
Delete data by filling all sectors with 0.
X O
Sleep Mode Enable,
Disenable
Sets the Sleep Mode behavior.
O O
LCD Backlight Auto, On, Off Selects the control on the backlight of the
LCD panel.
O O
Setting item Settings Explanation
EPL-
N3000
AcuLaser
M4000N
Normal 0~1 Sets the paper type and printing speed
to be notified to the engine when
printing with PaperType = Normal.
X O
Thick 0~1 Sets the printing speed to be notified to
the engine when printing with
PaperType = Thick.
X O
Extra Thick 0~1 Sets the printing speed to be notified to
the engine when printing with
PaperType = Extra Thick.
X O
Feed Offset -3.5 ~ 0.0 ~ 3.5 Sets the physical offset on the one side
of the paper.The unit is (mm). The value
can be changed in increments of 0.5mm.
O O
Scan Offset -3.5 ~ 0.0 ~ 3.5
O O
Feed Offset 1 -3.5 ~ 0.0 ~ 3.5 Sets the physical offset on the two-front
of the paper.The unit is (mm). The value
can be changed in increments of 0.5mm.
O O
Scan Offset 2 -3.5 ~ 0.0 ~ 3.5
O O
Setting item Settings Explanation
EPL-
N3000
AcuLaser
M4000N
Engine Status
Sheet Executable type Starts printing the Engine Status
Sheet.
X O
Print Log Report Executable type Starts printing the Print Log Sheet.
X O
Reset LC2
Counter Executable type Resets the counter for the used
amount of the paper source feed
roller.
X O
Reset LC3
Counter Executable type
X O
Clear Error Log Executable type Clears the Error Log List stored to
display on the Engine Status Sheet.
X O
TOP MP -4.0 ~ 0.0 ~ 4.0 Sets the margin on top direction of
the paper in each paper feeder .The
unit is (mm).
The value can be changed in
increments of 0.5mm.
O O
TOP LC1 -4.0 ~ 0.0 ~ 4.0
O O
TOP LC2 -4.0 ~ 0.0 ~ 4.0
O O
TOP LC3 -4.0 ~ 0.0 ~ 4.0
O O
TOP Duplex -4.0 ~ 0.0 ~ 4.0
O O
TOP Thick -4.0 ~ 0.0 ~ 4.0
O O
Side MP -4.0 ~ 0.0 ~ 4.0 Sets the margin on side direction of
the paper in each paper feeder.
The unit is (mm). The value can be
changed in increments of 0.5mm.
O O
Side LC1 -4.0 ~ 0.0 ~ 4.0
O O
Side LC2 -4.0 ~ 0.0 ~ 4.0
O O
Side LC3 -4.0 ~ 0.0 ~ 4.0
O O
Side Duplex -4.0 ~ 0.0 ~ 4.0
O O