Epson AcuLaser M4000N, Руководство по обслуживанию

Страница: 271 / 477

EPSON EPL-N3000/AcuLaser M4000N Revision C
Disassembly and Assembly 500 Paper Exit 271
Confidential
4.8.10 ROLL FU
Removal
1. Remove the COVER REAR 500. (p.270)
2. Remove the five screws (gold, tapping, 8mm) securing the CHUTE LOW FU to
the COVER REAR 500.
3. Release the hook of the COVER REAR 500, and remove the CHUTE LOW FU
from the COVER REAR 500.
4. Release the hook of the GEAR 21, and remove it from the ROLL FU.
5. Release the hook of the BEARING EXIT, and remove it from the CHUTE LOW
FU.
6. Remove the ROLL FU in the direction of the arrow.
Installation
1. Move the ROLL FU in the direction opposite to the arrow, and install it to the
BEARING EXIT on the side opposite to the GEAR 21.
2. Install the BEARING EXIT to the CHUTE LOW FU.
3. Install the GEAR 21 to the ROLL FU, and secure it with the hook.
4. Install the CHUTE LOW FU to the COVER REAR 500, and secure it with the
hook.
5. Secure the CHUTE LOW FU to the COVER REAR 500 with the five screws
(gold, tapping, 8mm).
6. Install the COVER REAR 500. (p.270)
Figure 4- 82. ROLL FU Removal
C A U T I O N
Carefully handle the hook of the BEARING EXIT as it may be
damaged by application of large force.
C A U T I O N
Securely insert the hook of the GEAR 21 into the groove of the
ROLL FU.
JG3100AA
ROLL FU
COVER REAR 500
BEARING EXIT
BEARING EXIT
GEAR 21
CHUTE LOW FU
4)
5)
3)
6)