Epson Aculaser CX21N Series, Руководство пользователя

Страница: 303 / 401

Printing Problems 303
Printing in the PostScript 3 Mode Problems
The problems listed in this section are those that you may encounter when printing with the
PostScript driver. All procedural instructions refer to the PostScript printer driver.
The printer does not print correctly in the PostScript mode
The printer does not print
Cause What to do
The printer’s emulation mode setting is
incorrect. The printer is set to the Auto mode by default, so that
it can automatically determine the encoding used in
the received print job data and select the
appropriate emulation mode. However, there are
situations where the printer cannot select the correct
emulation mode. In this case, it must be set manually
to
PS3
.
Set the emulation mode through the SelecType
Emulation menu on the printer. See "Emulation
Menu" on page 243.
The printer’s emulation mode setting for the
interface that you are using is incorrect. The emulation mode can be set individually for each
interface which receives print job data. Set the
emulation mode for the interface you are using to
PS3
.
Set the emulation mode through the SelecType
Emulation menu on the printer. See "Emulation
Menu" on page 243.
Cause What to do
The Print to file check box is selected in the
Print dialog box (except on Mac OS X).
Clear the Print to file check box in the Print dialog
box.
The Save as File check box is selected on the
Output Option sheet in the Print dialog box
(Mac OS X only).
Clear the Save as File check box on the Output
Option sheet in the Print dialog box.
An incorrect printer driver is selected. Make sure that the PostScript printer driver that you
are using to print is selected.
The Emulation menu in the printer’s Control
Panel is set to a mode other than
Auto
or
PS3
for the interface that you are using.
Change the mode setting to either
Auto
or
PS3
.