Epson AcuLaser C8500 Скачать руководство пользователя страница 31

Страница: 31 / 570

EPSON AcuLaser C8500

Revision C

PRODUCT DESCRIPTIONS

Specifications

1-11

1.2.2 Paper Specifications

1.2.2.1 Paper Types

Recommended paper: 4200 paper (B/W), EPSON high quality normal

paper (For color sigle-side ohly), EPSON coated
paper,

Normal Paper:

Normal copier paper, Recycled paper,
64/m

- 105g/m

(16lb - 28lb)

Special Paper:

Exclusive OHP film, Postcard, Label, Color paper, Thick
paper (105g/m

- 220g/m

), Envelope

NOTE 1:

lb: Ream Weight = lb/500sheets/17” x 22”

g/m

= 0.2659763 lb

NOTE 2:Before purchasing a large amount of paper, try it out and check that it

is properly fed.

NOTE 3:Avoid using the types of paper listed below to prevent abnormal

printing, paper jam, and printer malfunction.

• Carbon paper, non-carbon paper, thermal paper, impact paper, acidic paper

• Paper that has gone through a thermal or an ink-jet printer.

• Paper that is too thick or thin.

• Wet (damp) paper

• Paper to which a special coating has been applied, or colored paper that has gone

through surface process.

• Paper that has been lubricated (too smooth or slippery).

• Paper whose texture is different on the front and back.

• Paper with holes for binders and perforations.

• Paper with irregular shape or not cut with right angles.

• Paper with labels that come off and stick easily.

• Paper with glue, staples, or paper clips attached.

• Special ink-jet paper (Super Fine Paper, glossy film, and so on.)

• OHP sheets for other color laser printers, monochrome printers, and photocopiers.

• Paper that has gone through other color laser printers, monochrome printers, and

photocopiers.

• Pasted paper

1.2.2.2 Paper Source Classification

See Table 1-10.

NOTE: RF: Reliable feeding and good image quality

P: Possible, but limited to paper generally available
N: Not

supported

Table 1-10. Paper Usability for Each Paper Source

Paper source

Reco

mme

nde

per

Norm

per

Special paper

OHP s

Pos

tcar

bel

Thic

per

*1: 105 - 220g/m

Env

lop

*2: MON, C10, DL, C6

Standard tray (MSI)

*3: Exclusive OHP sheet only

S tandard universal cassette

A3W Cassette (option)

500-S heet P aper C assette U nit

Large Capacity Paper Unit

*4: Optional unit

D uplex U nit

Содержание AcuLaser C8500



























































































































































































































































































































































































































































































































































































Результаты поиска

Содержание AcuLaser C8500

Отзывы:

Похожие инструкции для AcuLaser C8500

Бренды по названию

Популярные бренды

Epson AcuLaser C8500, Руководство по обслуживанию

Результаты поиска

Содержание AcuLaser C8500

Отзывы:

Похожие инструкции для AcuLaser C8500

Бренды по названию

Популярные бренды