Epson 2200 - Stylus Photo Color Inkjet Printer, Руководство по обслуживанию

Страница: 63 / 258

EPSON Stylus PHOTO 2100/2200 Revision B
OPERATING PRINCIPLES Printer Mechanism 63
!
Timer cleaning
This printer consumes the ink of up to 1.27g/color depending on the combination
of the cumulative printing timer, cumulative cleaning count and cleaning timer.
!
Flushing
This printer executes two different flushings for the following purposes.
"
Periodic flushing
This is done to prevent ink viscosity in the Printhead nozzles from increasing
during continuous printing. A specific small amount of ink is discharged into
the Cap according to the Periodic flushing timer.
"
Periodic large-amount flushing
This is done to prevent ink viscosity in the Printhead nozzles from increasing
during continuous printing. A large amount of ink is discharged into the Cap
according to the Periodic large-amount flushing timer.
2.2.7 Paper Cutter Mechanism
The Paper cutter mechanism consists of such main parts as the Cutter motor, left and
right HP sensors (2 pcs. in all), Relay board, Paper eject roller shaft and Paper hold-
down flap in the Cutter unit.
!
Operation during printing
When the Cutter blade starts cutting, the Paper hold-down flap rises and holds the
paper during cutting. The HP sensors for detection of the Cutter blade position are
installed on both ends of the cutter operation area, detect whether the Cutter blade
operates properly, and displays Cutter position error or Cutter jam error according
to the operating condition.
Figure 2-16. Cutter Mechanism
Cutter blade
Paper hold-
down flap
Left HP
sensor
Right
HP sensor
Relay board Cutter motor
Paper eject roller shaft