Epson 2200 - Stylus Photo Color Inkjet Printer, Руководство по обслуживанию

Страница: 136 / 258

EPSON Stylus PHOTO 2100/2200 Revision B
DISASSEMBLY AND ASSEMBLY Disassembly 136
9. Release the one left side hook that secures the Hopper, as viewed from the ASF
Unit front, using tweezers or like.
10. While pulling up the left end of the Hopper as viewed from the ASF Unit front,
remove the Arm on the right end of the Hopper from the cutout in the ASF Unit
right end.
11. After sliding the Hopper, two left and right LD Roller Units, LD Roller Shaft and
Left Hopper Cam together to the left, pull the right end to the front to remove the
Hopper, two left and right LD Roller Units, LD Roller Shaft and Left Hopper Cam
from the ASF Unit.
Figure 4-32. Removing the Hopper, Two Left and Right LD Roller Units,
LD Roller Shaft and Left Hopper Cam
12. Release one hook of the ASF Frame from the notch in the bottom left of the ASF
Frame as seen from the ASF Unit rear, slide the ASF Frame to the right to release
the one cutout in the bottom right side of the ASF Frame, and while avoiding the
cutout, pull the ASF Under Frame to the diagonal bottom left to move it from the
ASF Frame.
Figure 4-33. Removing the ASF Under Frame
Hook
Cutout
Arm
Hopper
LD Roller
Units
When reinstalling the ASF Under Frame, mount it securely to the
six rear side hooks, one bottom right side cutout and rear side
joggle.
Refer to Figure 4-33, "Removing the ASF Under Frame".
Hooks
ASF Under Frame Cutout
Hooks Joggle
Bottom left
notch and hook
ASF Frame