Web admin interface
74
VGA2Ethernet User Guide
3.
Select Reboot Now.
4.
It takes a few minutes for the VGA2Ethernet device to reboot.
5.
After a few minutes log into the Web admin interface by browsing to its new
IP address. For the example above, browse to:
http://192.168.1.20/admin/
6.
Enter the Web admin interface user name and password to login.
To reset network settings to use DHCP
By default, if you connect the VGA2Ethernet device to a network with a DHCP server,
the DHCP server will automatically configure the network settings. If required you can
disable DHCP settings and use a static IP address. This procedure describes how to
re-enable DHCP settings that have been disabled.
1.
Log into the Web admin interface.
2.
Select Network.
3.
Select Use DHCP.
4.
Select Apply to save these changes.
5.
Select Maintenance.
6.
Select Reboot Now. It takes a few minutes for the VGA2Ethernet device to
reboot.
7.
After a few minutes log into the Web admin interface by browsing to its new
IP address. For example, browse to:
http://192.168.23.107/admin/
8.
Enter the Web admin interface user name and password to login.
Содержание VGA2Ethernet
