Installation
16
VGA2Ethernet User Guide
Toolbar
Save, print, and copy a snapshot of the current captured image.
Start, stop, pause and resume recording images.
Captured Image The image currently being captured by the device.
If the VGA2Ethernet User Interface Cannot Find the
Device
If the user interface cannot find the VGA2Ethernet device, make sure the device is
turned on and check the network connections. If you find and correct the problem the
device should automatically be detected by the user interface.
If you still cannot see the VGA2Ethernet device, it may not have obtained an IP
address from your DHCP server. See the “If the Network Does Not Have a DHCP
Server“ section to change the device’s IP address.
Finding the VGA2Ethernet Device Manually
You can find the VGA2Ethernet device from the VGA2Ethernet user interface by
selecting Select Device from the Capture menu in the VGA2Ethernet GUI application.
The user interface lists all Epiphan devices that can be found on the network. Select
the VGA2Ethernet device from the list and select OK. The VGA2Ethernet user
interface connects to the selected device.
Содержание VGA2Ethernet
