Web admin interface
59
VGA2Ethernet User Guide
5.
Web admin interface
This chapter describes configuring the Web admin interface options.
Logging into the Web admin interface
Use the Web admin interface to configure the VGA2Ethernet device. You can log
into the Web admin interface by:
Selecting Web Config from the Epiphan Network Discovery Utility (Windows
XP, Vista and 7 only).
Browsing to the VGA2Ethernet admin interface using any web browser. The
web browser can be running on Windows or Mac OS X.
Note:
You can always log into the Web admin interface by browsing to the default
VGA2Ethernet IP address, which is
http://192.168.255.250
. To log into a device using
this IP address you must change the IP Address of the video capture workstation to
the static IP address 192.168.255.249 and netmask 255.255.255.252. Then open a
Web browser and browse to:
http://192.168.255.250/admin
Disconnect any other Epiphan devices from the network before attempting to connect
to the VGA2Ethernet device. Restore the original network settings for your
workstation.
To log into the Web admin interface from the Network Discovery
Utility
1.
Start the Epiphan Network Discovery Utility and select Search to find the
Epiphan devices on the network.
2.
Select the VGA2Ethernet device and select Web config. You can log into any
device with a status of Device OK. A web browser starts and you are
prompted for a user name and password.
3.
Enter the following (assuming the admin password has not yet been
Содержание VGA2Ethernet
