Installation
10
VGA2Ethernet User Guide
VGA2Ethernet Software Features
Use the following software features to install and configure the
VGA2Ethernet device.
Factory default
IP
address and
network mask
IP: 192.168.255.250
Netmask: 255.255.255.252
Refer to the
Restoring the VGA2Ethernet Default
Factory Configuration
section to know more about
restoring factory default configuration.
IP
address
from a
DHCP
server
The VGA2Ethernet device can get an IP address on the
network from a DHCP server if the network has one. If the
network does not have a DHCP server, see the “If the Network
Does Not Have a DHCP Server“ section.
Web
admin
interface
Use the VGA2Ethernet Web admin interface for changing the
VGA2Ethernet IP address, making device adjustments, and
installing new firmware. You can log into the Web admin
interface by selecting Web config from the Network Discovery
Utility or by opening a web browser and browsing to:
http://< VGA2Ethernet_IP_Address>/admin/
User Name: admin (no password)
The Web admin interface is described in Chapter 3 of this User
Guide.
Содержание VGA2Ethernet
