Installation and Getting Started
Windows video capture workstation Installation
Installation Guide
Page 9
If you are installing a USB Frame Grabber you must install the
drivers and application on the Windows video capture
workstation
before
connecting the USB Frame Grabber to the
workstation USB port.
If you are installing a PCIe Frame Grabber you should install the
drivers and application on the Windows video capture
workstation
after
installing the PCIe Frame Grabber in a PCIe slot
of the Windows video capture workstation. See
If you are installing a Network Frame Grabber you must install
the drivers and application on a Windows video capture
workstation that is connected to the same network as the
Network Frame Grabber.
To install the Windows drivers and application
The same drivers and application software are used for all Frame
Grabbers. The drivers and application software includes the
Epiphan device drivers, the capture application, and the Network
Discovery Utility (Network Frame Grabbers and KVM2Ethernet
only).
1
Find the latest Windows Drivers and Application software.
Browse to
http://www.epiphan.com/products/
. Then find
your Frame Grabber model and select its Download page and
scroll down to the Windows section of the download page.
2
Download the latest version of the drivers and application that
will run on the video capture workstation.
Make sure you note the download destination folder.
3
Unzip the downloaded file.
Right-click on the .zip file and choose Extract All.