Installation and Getting Started
Connecting Network Frame Grabbers
Installation Guide
Page 25
Note:
The VGA2Ethernet device will not capture images until a
video capture workstation has found the device on the network
and an application is requesting captured images. Even if the
device is properly connected to a VGA source the red LED will
not flash unless a video capture workstation is receiving captured
images.
Network Frame Grabber Software Features
Use the following software features to install the VGA2Ethernet
or VGA2Ethernet Pro device on the network.
Red LED
During operation the red LED blinks each time the
device captures an image and sends it to a video
capture workstation. You can use the red LED as an
indicator that the device is capturing images.
Default IP
address and
network mask
IP:
192.168.255.250
Netmask:
255.255.255.252
IP address
from a DHCP
server
The device can get an IP address on the
network from a DHCP server if the network
has one. If the device gets an IP address from a
DHCP server, the capture application and
Network Discovery tool can automatically find
the device on the network.