![background image](http://html.mh-extra.com/html/epiphan/dvi2usb-solo/dvi2usb-solo_installation-manual_2417790026.webp)
Installation and Getting Started
Connecting Network Frame Grabbers
Page 26
Frame Grabber
Connecting Network Frame Grabbers
To connect a Network Frame Grabber such as the VGA2Ethernet
or VGA2Ethernet Pro device, in addition to the Network Frame
Grabber itself you need:
• A VGA or DVI video source.
• An Ethernet connection between the device and the video
capture workstation.
Note:
The video capture workstation and the Network Frame
Grabber must be on the same Ethernet subnet.
Figure 10:Connecting a VGA2Ethernet device
To connect and turn on a Network Frame Grabber
1
Use a VGA or DVI cable to connect the VGA or DVI source to
the Network Frame Grabber INPUT or VGA IN port.
You can use an active VGA or DVI splitter to split the VGA or
DVI signal between a monitor and the Network Frame
Grabber.
Web admin
interface
Use the Web admin interface for changing the
IP address, making device Adjustments, and
installing new firmware. You can log into the
Web admin interface by selecting
Web config
from the Network Discovery Utility or by
opening a web browser and browsing to:
http://<VGA2Ethernet_IP_Address>
User Name:
admin (no password)
Ethernet
Cable
Network Frame Grabber
VGA
Cable
Ethernet
Cable
Video Capture
Workstation
VGA source
Ethernet
Network