![background image](http://html.mh-extra.com/html/epiphan/dvi2usb-solo/dvi2usb-solo_installation-manual_2417790034.webp)
Installation and Getting Started
Connecting KVM Frame Grabbers
Page 34
Frame Grabber
KVM2Ethernet Hardware Features
The KVM2Ethernet device has the following hardware features.
Figure 15:KVM2Ethernet connectors and LEDs
Power
Connect the AC adapter to the device power
connector and to a power outlet.
ETH 1
Primary 10/100/1000 Base-T RJ-45 auto-sensing
Ethernet network port to connect the device to the
Ethernet network. The ethernet ports are auto-
sensing. You can connect ETH 1 or ETH 2 directly to
the video capture workstation Ethernet port.
ETH 2
Secondary 10/100/1000 Base-T RJ-45 auto-sensing
Ethernet network port. This port is useful for some
configurations.
VGA IN
Connect the yellow end of an Epiphan KVM cable
from the machine to be managed to the
KVM2Ethernet device.
USB port
Not used.
Eth 2
Eth 1
Power
Left Side
Right Side
LEDs
USB
VGA
OUT
VGA
IN
(KVM)
Reset
Button
Not
Used