Installation and Getting Started
Connecting Network Frame Grabbers
Installation Guide
Page 23
Figure 9: VGA2Ethernet Pro connectors and LEDs
Power
Connect the AC adapter to the device power
connector and to a power outlet.
Eth 1
Primary 10/100/1000 Base-T RJ-45 auto-sensing
Ethernet network port to connect the device to the
Ethernet network. The ethernet ports are auto-
sensing. You can connect ETH 1 or ETH 2 directly to
the video capture workstation Ethernet port.
ETH 2
Secondary 10/100/1000 Base-T RJ-45 auto-sensing
Ethernet network port. This port is useful for some
configurations.
INPUT
Connect a DVI or VGA source to a VGA2Ethernet
device. To connect a VGA source you require a VGA
to DVI converter. See the
signaling, VGA modes, and video modes supported
by Frame Grabber devices.
INPUT also includes an audio input port for
capturing audio.
Eth 2
Eth 1
Power
LEDs
Reset
Button