18
Installation and Operating Instructions - KNX Home-Modul
Mounting and electrical installation
EN
Advanced installation
In the case of a multi-cabin installation with the EmoTouch 3 control
unit, the KNX Home-Modul must be installed in the same S bus seg-
ment as the relay box that is to be controlled. It may also be necessary
to use an S bus plug-in module. The S bus address of the cabin to be
controlled must be configured in the KNX Home-Modul.
4.2.1 Connecting the S bus cable to the relay box or module
NOTICE
Incorrect data transfer due to incorrect installation
The software does not recognise the KNX Home-Modul. Data is
transferred incorrectly.
Only plug S bus cables into S bus jacks on the circuit board.
Only connect one KNX Home-Modul per cabin.
A
Relay box circuit board
C
Add-on module circuit board
B
Control unit
D
SBM GLT KNX
S-Bus
S-Bus
S-Bus
S-Bus
C
A
D
B
