KNX Home-Modul - Installation and Operating Instructions
17
Mounting and electrical installation
4
Configure the S bus address if necessary. See:
4.3 Configuring addresses for multi-cabin installations,
5
Program the KNX address and user software. See:
4.4 KNX programming,
6
When all settings have been completed, place the top piece of the hous-
ing on top and attach it using the 4 housing screws.
4.2 Connecting the KNX Home-Modul with the
S bus
On the circuit board of the relay box or add-on module, you will find
2 connection jacks for the S bus lines. Four connection jacks are provided
with the SteamRock Premium.
Sample installation:
In a standard installation, the control unit and the KNX Home-Modul are
plugged into the relay box.
Standard installation
In the advanced installation, the control unit and the add-on module
are connected to the relay box. The KNX Home-Modul is connected to
the add-on module.
A
Relay box circuit board
C
KNX Home-Modul
B
Control unit
S-Bus
S-Bus
B
C
A
