16
Installation and Operating Instructions - KNX Home-Modul
Mounting and electrical installation
EN
4
Attach the bottom piece to the mounting location using the screws pro-
vided.
Bottom piece of SBM GLT KNX housing
Wiring the connections
1
Feed the connection cable through the opening on the top piece of the
housing.
Upper piece of SBM GLT KNX housing
2
Plug the S bus line into the RJ12 jack.
3
Plug the KNX lines into the terminal block.
Carefully pull back any excess cable length or place it in a loop in the
bottom piece of the housing.
A
Terminal block for KNX lines
C
Cable feed opening
B
RJ12 jack for sauna bus line
A
B
C
