10
Installation and Operating Instructions - KNX Home-Modul
Description of the unit
EN
Description of the unit
The KNX Home module allows you to monitor and control cabin-control
functions using a building management system. This enables monitoring
of individual cabins or a complete multi-cabin installation.
In a multi-cabin installation, a KNX Home module is connected for each
cabin.
The KNX Home module transfers data between the sauna bus and the KNX
bus in both directions. Its use is configured using the building manage-
ment system. The KNX Home-Modul should be operated with software ver-
sion ETS5 or higher.
Scope of delivery
The SBM GLT KNX is encased in a plastic housing. The housing completely
encloses the circuit board and the electronics.
The following components are included in the scope of delivery:
KNX Home-Modul
Wood screws 4 x 25 mm
4 anchors
S bus cable 10 m, with 2 RJ12 plugs
