background image

16

GB

Symbol description (start screen)

Operation principle with a touch screen GUI

On the GUI (sauna cabin image) you can switch the functions by touching shortly the correspond-

ing objects (e.g. lamp). By touching these objects >3 sec you can make settings (adjustments). 

The symbols in the lower black strip (except for “settings”) should be touched for >3 sec for safety 

reasons.

Sauna heater (heating) on/off

Switching the sauna heating on/off, to switch on touch for >3 sec, to switch off touch the symbol once 

shortly.

Return

In all sub-menus - return to start screen, to the 

previous menu or to the previous selection.

Auto-Start

Settings for the switching-on time pre-selection (pre-set timer) - to program the automatic switching at a 

later time up to 24 h in advance or to program the week timer / single switching time.

Profiles

User profiles (1 - 8) for individual settings.

Settings

Sub-menu for additional (extended) settings. Like e.g. language, time, date, screensaver, special parame-

ters, display lock, etc.

Hint:
The small image of the sauna cabin in the upper right corner in sub-menus functions as a 

home

“ button to allow quick return to the start screen at any time. Simply touch this image 

shortly. Please remember that all not yet saved settings will be lost.

If you do not operate the control unit for more than 20 seconds the control unit will return to the 

start screen. All not confirmed settings will be lost in this case.

Thanks to the integrated battery (CD2032 type, in control panel) all settings will be stored in the 

memory and will be retained even in the case of a very long time power loss.

New extension modules and optional equipment will be normally automatically detected and 

configured. Upon restart the control panel will show the corresponding new symbols in the 

menu navigation. 

Operation is based on the short or 

long touching of the display.
By touching the display a small yel-

low square will appear in the low 

right corner to indicate that the dis-

play is functional and gets the input.

Содержание EmoTouch II +































Отзывы: