EOS EmoTouch II +, Руководство пользователя и эксплуатационное руководство

Страница: 20 / 30

20
GB
Light on / off
Touch shortly the image of the lamp on the display to switch the light on
or off. Display indication: - light off, - light on.
How to dim the cabin light
You can quickly dim the cabin light (0-100%).
Press the lamp image on the display for >3 sec. The
cabin light will switch (if switched off) and a sub-
menu window for light brightness will open. Using
„+“ and „-“ buttons you can adjust the brightness. The
selected brightness will be shown in %. Confirm the
selection to store the setting and exit.
!
Attention! Only dimmable illuminants may be
used! Otherwise the control unit or the illuminant may be damaged! The warranty will be void
in such case.
Zeitvorwahl (Auto-Start)
With this function you can program your sauna to switch on at a
later time with up to 24 h delay. Touch the
symbol on the start
screen for >3 sec. A sub-menu window with the timer settings will
open. Touch the Auto-Start
symbol to select it and touch it
again shortly to enter the settings in a new window. Set the de-
sired start time using the „+“ and „-“ buttons. Confirm the setting
by touchin the green OK button. On the start screen you will now see the flashing start time in
low right corner. This time means the real switching time, not the delay until the switching of the
sauna.
In order to cancel the activated Auto-Start setting, touch the main On/Off button shortly. The
blinking Auto-Start time on the start screen shall disappear.
!
Attention! This function is only allowed to be used if your sauna is fitted with an ap-
proved safety system, which prevents the heater from being switched on in unsafe condition
(e.g. a towel forgotten on the heater). Even in the case if your sauna has such an approved
system, prove there are no objects forgotten on the heater. Risk of fire!
Timer
Select Auto-Start
Light
Brightness adjustment
85%
01. January 2014
15:20:35