EOS EmoTouch II +, Руководство пользователя и эксплуатационное руководство

Страница: 22 / 30

22
GB
1. Set the required start time (hours and minutes) - e.g. 9:30.
2. Set the required heating time (hours and minutes) - e.g. 3:30.
3. Set the required operation type - dry Finnish sauna or humid sauna (Bi-O heaters only)
4. Set the required temperature.
5. Set the required humidity (Bi-O heaters only).
After the last step the control panel will return to the week overview. All days with assigned pro-
grams will be displayed in green. Repeat the above steps for every new program you may require
(max. 4 per day). After you return to the main start screen you will see the indication of the next
(earliest) switching time flashing in the bottom right corner (e.g. Monday, 9:30)
How to delete or change the week timer
In order to delete or change the week timer program open the week timer via Timer settings menu.
1. Select the respective day of the week.
2. Select the respective program number.
3. Make the necessary adjustments (start time, heating time, temperature) or...
4. to delete the program, set the start time (hour and minutes) to „--“
and touch the green OK button shortly to confirm and exit.
5. The display will return to the week overview.
Notice
: By active week timer you will always see the next earliest switching time displayed flashing
in the bottom right corner. Also if you programmed several switching times or a combination of
the single event switching and week timer switching.
Profiles
You can save your preferred settings in up to 8 user profiles.
This allows to switch between profiles and quickly load the necessary settings without having to
set them again and again.
You can for instance set individual profiles for your family members or by commercial operation
you can set profiles with specific climate conditions and assign them to the particular days of the
week or time of the day in order to simplify the operation of the sauna cabin and avoid unneces-
sary repeating settings.
How to set a profile
Press for > 3 sec on the symbol on the start screen. A sub-menu win-
dow with 8 profiles will open. Select a profile by touching it shortly (the
symbol colour will turn white), then touch it again to activate the set-
tings. The control unit will return to the start screen. All settings which
you make will be now assigned to the selected profile.
How to load or change a pre-set profile
Select and load as described above the profile, for which you have set specific set-
tings. If you now switch on the sauna, it will be switched with the climate settings assigned
to this profile. You can change the settings at any time, they will stored in the selected active
profile.
The figure inside the profile symbol indicates the profile number. For instance = profile 1.