background image

19

GB

Operation and program settings

Sauna on / off

Touch the 

 symbol for 3 sec. The sauna heater will switch on and the display will show the ac-

tive heating (see page 29). The light will switch on automatically as well.

To switch the sauna off, touch shortly the 

 symbol again. By humid operation the sauna-dry 

program will switch on (if not disabled in setup) for the preset time (max. 30 min). After that the 

sauna will switch off.
You can interrupt the sauna-dry program - touch shortly the 

 symbol.

 Dry sauna or humid operation mode (Bi-O)

To enable the humid mode touch the vaporizer shortly - the 

herbs cup will fill blue. To disable the humid mode touch the va-

porizer again - the blue filling will disappear and the control unit 

will return to the dry sauna operation mode.

 

Temperature

Touch the heater image for >3 sec. A sub-menu win-

dow will open and display the last set (or default) 

temperature. Set the desired temperature using „+“ 

or „-“ buttons. Touch the confirmation button to save 

and exit. This setting can be made also during active 

heating.

 

Humidity

Touch the vaporizer image for >3 sec. A sub-menu 

window like above will open and display the last set (or default) humidity value. Set the desired 

humidity using „+“ or „-“ buttons. Touch the confirmation button to save and exit. This setting can 

be made also during active heating.
With a connected humidity sensor (% sign appears inside cloud) the relative air humidity will be 

controlled. Without humidity sensor the humidity will be controlled in proportional to time way. 
“30%” then means 30% of the total heating time. The display will show the 

 symbol.

Please observe that with a humidity sensor the humidity setting will depend on the pre-set tem-

perature. For safety reasons only the values to the left and under the curve may be selected. For in-

stance at 60°C temperature your can set up to 40% rel. air 

humidity. In order to set a higher humidity you will need 

first to reduce the temperature.

If the sauna has been used in dry mode with high tem-

peratures and you switch to the humid mode, the vapor-

izer will start to work only after the temperature drops 

under the max. allowed level (70°C). 

10

100

90

80

70

60

50

40

30

20

0

100

90

80

70

60

50

40

30

20

10

T

 [°C]

rH

 [%]

Dry sauna

Info

Setting for the

dry sauna operation

85%

01. January 2014

15:20:35

Humid sauna

Содержание EmoTouch II +































Отзывы: