ENVO ELECTRIC SNOWBIKE KIT Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 56

background image

ENVO SNOWBIKE KIT MANUAL

|

VERSION 1.2

53

I M P O R TA N T N OT E:

ENVO does not offer tune-up and snow product mechanical services beyond limited installation
or repairs of electrical system.

9.2. WA R R A NT Y T E R M S

ENVO Drive Systems warranty covers the full warranty period for all parts of the SnowBike Kit for
the first owner, within the framework of the following conditions:
• This warranty covers the repair and/or the replacement of SnowBike Kit components.
• Costs for repair work performed in advance by persons who have not been authorized by ENVO

Drive Systems will not be reimbursed. In such a case, any warranty claims will cease.

• The warranty period starts with the date of purchase. Warranty claims must be reported

immediately.

• If the battery pack does not provide full capacity in the course of normal use, or for batteries

going through a normal aging process that have a reduction of performance, the ENVO Drive
Systems warranty covers batteries that fit these conditions within the warranty period. The
battery capacity must prove to be less than 70% of initial condition.

• No warranty claims are accepted in the case of damages due to the following:

1. External influences, particularly falling rocks, collision, normal wear and tear, improper

handling, acts of god, accident and other external events with an immediate external
effect due to mechanical powers.

2. Purposeful and/or malevolent acts, theft and robbery as well as natural hazard events

and/or acts of mischief.

3. Inappropriate use, e.g. the product was exposed to liquids, chemicals of any type and/or

extreme temperatures, wetness and humidity and/or if the battery suffers damages due to
non-compliance with instructions.

4.  Overcharging the battery or not adhering to the instructions of battery handling.
5.  In the case of test, maintenance, repair and replacement work due to normal use.
6.  In the case of use of the battery in systems that are not approved for such use with this

particular product.

7. In the case of the operation of the ENVO Drive Systems system with batteries other than

the batteries designed for the SnowBike Kit system (refer to user manual).

«
...
51
52
53
54
55
...
»

Содержание ELECTRIC SNOWBIKE KIT

























































Отзывы:

Нет отзывов

Похожие инструкции для ELECTRIC SNOWBIKE KIT

MX Z TNT 600R E-TEC

Бренд: Ski-Doo Страницы: 291

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды