ENVO SNOWBIKE KIT MANUAL
|
VERSION 1.2
47
5. Realign the components if necessary and carefully tighten the bolts to ensure reliable clamping
of the components. The maximum torque values are printed directly on the components and/or
specified in the enclosed operating instructions. If neither are available, contact ENVO support
for assistance
6. Confirm the saddle is not out of alignment, using the top tube or the bottom bracket shell as a
reference. If necessary open the clamp, realign the saddle and re-tighten the clamp.
7. Keep an eye on the removed battery and ensure it is kept on a fire safe surface. Check for any
signs of damage on the battery case, listen for rattling or the sound of loose particles inside,
look for smoke, and ensure the battery or its parts do not get warm on their own. If nothing
suspicious is detected after 15-20 minutes, try connecting the battery and turning on the
system for an electricity check.
8. Check the display. Are all the values displayed as usual? Do not use your SnowBike if the display
shows an error message or a warning. If necessary, switch off the system and wait at least 10
seconds before turning it on and checking it again
9. Take a good look at the whole SnowBike to detect any deformation, colour changes, cracks.
Ride back very carefully or walk your SnowBike back to a professional mechanic and have the
mechanic check the SnowBike and help resolve any issues
10. If you have had an accident and are unsure whether your SnowBike will function properly, leave
your bike rather than risk riding and endangering yourself and others
11. If you do ride your SnowBike, do not accelerate or brake hard until the bike has been checked by
a mechanic
12. Deformed components, especially those made of aluminum, can break without previous
warning. If this occurs, they may not be repaired, i.e. straightened, as the imminent risk of
breakage will remain. This applies in particular to the fork, the handlebars, the stem, the cranks,
the seat posts and the pedals. When in doubt, you should replace these components
13. At no time should you make any modifications to your SnowBike Kit electrical systems, unless
they are explicitly approved by the manufacturer in writing
14. Contact ENVO support for repairs and replacement parts in case of damage
Do not set off on your bike with drive assistance if the control element shows a warning.
Doing so could lead to serious injury or death.
