ENVO SNOWBIKE KIT MANUAL
|
VERSION 1.2
46
7. MAINTENANCE & REPAIR
7.1. M A I NTA I N I N G PA RTS
• Once installed, your Electric SnowBike Kit like any normal ebike, requires regular maintenance.
The drivetrain needs cleaning and lubrication, the brake pads need to be changed periodically,
and levers need to be bled if hydraulic or cables are changed
• In this manual we provide important basic guidelines on how to maintain and inspect your
installed SnowBike Kit. We cannot teach you everything you need to know to properly inspect
and service your SnowBike. That is why we repeatedly encourage only mechanically inclined
users purchase this product
• Ensure your snowboard is waxed and regularly inspected for cracks and other damage
• Your installed SnowBike Kit should be periodically cleaned
7.2. I N C A S E O F AC C I D E NT
If you have an accident, drop your SnowBike or your SnowBike falls over, your SnowBike
is unsafe to ride until you follow the instructions included in this section. Failure to follow
these instructions could lead to component or bike operation failure which could lead to
serious injury or death.
1. Remove the battery before performing any additional service, inspection, or maintenance
on your SnowBike. Failure to remove the battery could lead to the SnowBike turning on
unexpectedly, causing serious damage or injury
2. Read, understand and comply with the drive system user manual. Do not disassemble or
attempt to service components unless you have been advised how to do so, explicitly in writing,
by the ENVO Drive Systems
3. Check whether the snow track is still firmly fixed in the dropouts and centered with respect to
the frame or fork.
4. Check the handlebars and stems to confirm that neither are bent or broken, and that they are
level and upright. Make sure the stem is firmly fixed on the fork by trying to turn the handlebars
relative to the front wheel. Briefly lean on the brake levers to make sure the handlebars are
firmly fixed in the stem
