ENVO ELECTRIC SNOWBIKE KIT Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 56

background image

ENVO SNOWBIKE KIT MANUAL

|

VERSION 1.2

16

• Never store the battery in the discharged state. After extensive use, your battery’s charge-

holding capacity will decrease. If you find that your battery does not hold sufficient charge, you
should contact ENVO Drive Systems to order a replacement.

• If the battery isn’t used for an extended period of time, charge it fully and recharge it every 2

months. Store it in a cool, dry place.

• Your ENVO Electric SnowBike battery is engineered with precision for a long useful life. Do not

use it to power other electrical devices. Improper use of the battery may shorten its useful life
or cause fire or explosion. If you experience unusual sounds or odors coming from the charger
or the battery, unplug the charger immediately and contact ENVO Drive Systems customer service.

3.5. B AT T E RY M A I NT E N A N C E

• Improper use of the battery charger can cause a fire resulting in property damage, severe

injury, or death. Please review the following instructions and guidelines carefully to ensure safe
battery use and maintenance.

• If you are not going to use your battery for a while, fully charge the battery prior to turning it off.

Be sure to turn on and charge your battery every 2 months to ensure it never completely loses
its charge.

• The battery will get hot during charging, this is normal; however, if you smell or see any smoke,

turn the battery and charger off and unplug anything attached to the battery. Call ENVO Drive
Systems to obtain a diagnosis or a replacement.

• After a ride, fully recharge your battery as soon as it has cooled to room temperature. If battery

is left in the discharged condition it will deteriorate much faster than a fully charged battery.

• Do not block the fan vent on the battery pack or external charger. This can cause overheating

and fire.

• You should protect the battery from water. Never submerge your bike or battery in water, or

spray the battery with water.

• DO NOT use this battery with any other vehicle or appliance. Use of this battery with any other

product will void the warranty and may create hazardous conditions that could cause a fire,
resulting in property damage, severe injury, or death.

• Never disassemble the battery or open the battery case. There is a significant risk of electric

shock or damage to the battery. This will also void the warranty.

«
...
14
15
16
17
18
...
»

Содержание ELECTRIC SNOWBIKE KIT

























































Отзывы:

Нет отзывов

Похожие инструкции для ELECTRIC SNOWBIKE KIT

Бренд: Yamaha Страницы: 54

Ski-Doo MX Z X 440 2007

Бренд: BRP Страницы: 30

Lynx Commander 800R E-TEC 2018

Бренд: BRP Страницы: 118

Lynx Rave 600RS 2020

Бренд: BRP Страницы: 188

Lynx Commander GT 1200 4-TEC Comfort

Бренд: BRP Страницы: 164

Lynx 69 Ranger 900 ACE

Бренд: BRP Страницы: 181

Lynx Radien ACE 2019 Series

Бренд: BRP Страницы: 237

LYNX DEEP SNOW SPORT 2023 Series

Бренд: BRP Страницы: 316

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды