53
Secondary Installation
p
aneL
anD
m
eDia
i
nstaLLation
:
Step 1.
Remove surround panel and glass door (see “
m
aIntenance
anD
s
erVIce
” section).
Step 2.
Remove light deflector by loosening two retaining T-20 screws (see Figure 79).
A
DETAIL
A
SCALE
1 : 5
Step 3.
Remove the liner retainers one at a time using a 5/16 socket. The screws only have to be
loosened, not completely removed, as the retainers are slotted. Remove the side liners first,
then the rear (see Figure 80).
Step 4.
Prepare new liners for installation. Wear clean vinyl gloves when handeling the liners, the
ceramic material can irritate your skin. Take care not to damage the liners as they are very
fragile and can chip easily. If handeling porcelain liners, it is still a good idea to wear gloves
as the oils from your fingers and stain the enameled coating. If the liners arrive damaged,
please contact your ENVIRO dealer for replacement.
Step 5.
Replace liners back into position starting with the rear. Please note that any liner options
containing brick will have to be aligned with each other. The rear liner will only line up
with the side liners in one position. Line up the top corners ahead of time to determine the
installation direction. Retighten retainers once liners are in position.
Step 6.
Reinstall removed components.
Figure 79: Light Deflector Removal
Figure 80: Liner Retainers
